[personal profile] tecedekaxtone
This is a type of headwear I've so far only seen worn by men, if anyone out there has proof for this beeing worn by women in period please share!

To make a pattern was a bit more tricky: this is what I came up with:


 and of course, some other little bits that are square.

I had a pattern for a scullcap made from 6 pieces. I wanted 4 so I quickly made a mockup from the old pattern and cut it into 4 pieces. Traced one and made another mockup. It fit just right so then I added the strips at the bottom edge. Mine are 7.5 cm long. The Earflaps I also experemented a bit. It's great to have those boxes of toile fabrics (old sheets and bedspreads and leftovers that really cant be used for anything else). Trial and error is so much easier on the mind if the fabric's inexpensive. My earflaps just barely meet underneath the chin when tied together. My earflap turned out to be 17 cm long. The square pieces were just trial and error as I went a long.

So this is how I made it:

  • Cut two of B1-B2 pattern piece. Flip pattern piece B2 over for the second piece which will create a left side and a right side. Cut out the linings for the earflaps (B3) in a nice contrasting colour. Cut a strip of fabric 38 cm long and 8 cm wide and another 20 cm long and 12 cm wide. (B4 and B5)
  • Pin and sew the four pieces together. Alternating the pieces B1 and B2. Make sure that the Earflaps end up where you want them!
  • The earflaps: Pin the lining right sides facing each other. Sew as close to the edge as you can. Trim the edges and turn. Press the flaps flat. You now have something looking like this:

  • Take the longer of the two strips (B4) Start pinning the slashed edges to the strip. Make sure they are pinned as close together as you can without letting them overlap. Stitch them all together and back to the ironing board! Press and fold the strip so it looks like a brim. Sew the edges together on the wrong side ( the side that goes on the inside of the cap). Pin the ends into each earflap. Do the same with the neckslashes. As you’ll notice I’ve made the back strip wider. This is to make it fit better. When both front and back are pinned to the earflaps:
  • Put a stitch in along the inner edge at each slit. This makes the strips/slashes bulge nicely on the outside and the brim to stay put.
  • Try it on and adjust the fit by angling the back strip, depending on the shape of your head you may want to adjust the front strip as well. I had a steeper angle on the back and none on the front one. Use chalk to mark the edge. Cut away the excess fabric and fold in the seam allowance and sew it shut.
  • Put ties at the end of each earflap.
  • Done!
This is my first "Schlappe"

In trying it out I thought I needed to move the earflaps forwards wich I've since adjusted accordingly so the pattern you've got above is the new and improved one!

Интересный блог

Date: 2012-02-20 09:55 am (UTC)
From: [identity profile] voletakero.livejournal.com
Такие посты только прибавляют популярности.Image (http://zimnyayaobuv.ru/)Image (http://zimnyaya-obuv.ru/)



July 2013

28 293031   

Most Popular Tags

Style Credit

Expand Cut Tags

No cut tags
Page generated Sep. 22nd, 2017 06:06 am
Powered by Dreamwidth Studios